2021.10.25 13:16 CCJ22 [Android] [2021.41.0] How to get links to open externally?
2021.10.25 13:16 rjj296 Review of Firman T07571 Generator (Item# 1300533)
Howdy Y'all, I thought some of you may be interested in the test I put my Firman Generator I got from Costco. This was my first generator and I chose it because of the tri-fuel feature.
My intent: I bought this for disasters. I intend to run my refrigerator (900 W), A space heater or portable Air Conditioner for a single room (1500 W), lighting, and cell phone/communications charging (600 W).
Fuel: I plan on primarily using propane as it stores well but I cycle through 20 gallons of Gasoline for my vehicle so I can use that as a backup fuel if I decide to not use the gasoline to get out of the city.
Sound: It is loud. This is definitely not a quite or stealthy generator. I used ear protection when I was working right next to it. Sound measurements below. Sound measurements taken with iPhone app - accuracy is unknown. May invest in a generator noise defining box.
Setup: 15 lbs propane tank connected via included hose. Grounding wire ran from the generator to house's grounding wire at the main breaker box. Used 2 space heaters, a portable AC Unit, and a dehumidifier as the dummy load. This was tested in Austin on Saturday, temperatures around 80 and humid. Used the included L14-30R Break Out Cable. Testing area was in my backyard about 20 feet from my house.
Propane: If I use 15lbs of propane a day, that is 5 hours of run-time given my planned load. With propane being approximately $1/lb - the cost will be about $15/day. I plan on using two tanks and swapping them out every hour so they do not freeze. Eventually I plan on getting a 100 lbs tank at some point - but then I need to figure out how to get it into and out of the truck so I get get it filled. I am not sure I want to install a natural gas line - TBD
Central Time Test Time Load (W) Tank Weight (lbs) Note 8:10 0:00 0 31 Setup 8:38 0:00 0 31 Start of Test 9:20 0:42 1500 29 Add Space Heater (1500 W) 10:17 1:39 1500 27 Test Paused 12:47 1:39 3000 27 Add 2nd Space Heater (1500 W) 13:47 2:37 4500 24 Add Air Conditioner (!500W) 14:43 3:33 4500 19 Propane Tank Froze after two hours of running 15:17 3:33 5000 19 Restart Test & Add Dehumidifier (500W) 15:37 3:53 5000 17 Propane Tank Froze again - need more than 20 min to thaw - need second tank 16:08 3:53 5000 17 Restart Test 16:14 3:59 5000 17 15 lbs Propane Tank Empty - only got 14 lbs out of it - need bigger tank Load (W) Estimated Consumption Rate (Lbs/Hour) 0 2 1500 2 3000 3 4500 5 Distance (m) Noise Level (dB) 0 102 5 86 10 78 Inside House 50 Opposite Side of House 65
2021.10.25 13:16 Dreamvillan14 23M Just got played and wanna know where I stand
|submitted by Dreamvillan14 to truerateme [link] [comments]|
2021.10.25 13:16 Whey-Men UK - About 200 inmates are isolating at Perth Prison due to a Covid-19 outbreak.
2021.10.25 13:16 BotDefense overview for magusnetvczxfd
2021.10.25 13:16 sleepmoon Dream Team Kingsguard...
I have a fun little question that I'm interested in hearing everyones answers
If you were a king in Westeros and had the ability to pick 7 swordsmen from ANY point in time, who would your kingsguard be and why did you choose them?
submitted by sleepmoon to pureasoiaf [link] [comments]
2021.10.25 13:16 TheFakePseudonym 🚀
2021.10.25 13:16 adamthegoose an attempt at my favorite
|submitted by adamthegoose to Deltarune [link] [comments]|
2021.10.25 13:16 cool_berserker Try this Hot South African genre (variation of house music) I dare you to try just 3 songs!!
2021.10.25 13:16 JustinMBailey There’s a lesson in this
|submitted by JustinMBailey to Thatsactuallyverycool [link] [comments]|
2021.10.25 13:16 jmayniac Very low flow rate
Anybody else have to turn down their flow rate to like 55% to get the correct dimensions on a test cube? The stock Ender 5 I just got is the only printer that has this issue? Not the filament either as I have tried several different ones.
submitted by jmayniac to ender5 [link] [comments]
2021.10.25 13:16 Emma9_11 I’m gonna be waiting for PFF’s public apology…
|submitted by Emma9_11 to GreenBayPackers [link] [comments]|
2021.10.25 13:16 pseventeen Looking for Clan Members
my clan needs some active grinders to help out with clan wars Nothing ridiculous just contribute We usually win all wars comment ill reply❕ Region- Global Clan name- starshopping💫
submitted by pseventeen to CODMobile [link] [comments]
2021.10.25 13:16 Bleigelb NEW AND LIMITED ⭐️: The new winter edition 🥶 by RedBull with pomegranate flavour! Have you tried it already and if so, what do you think of it 🧐? For the german speaking and interested people: I linked our first reaction and review below 👇 🙂
|submitted by Bleigelb to redbull [link] [comments]|
2021.10.25 13:16 Count-Roland A gilded Frankish spangenhelm from the sixth century, found in a Frankish lord's grave in Morken-Harff. It is now located at the Rheinisches Landesmuseum. (Bonn, Germany)
|submitted by Count-Roland to Frankish [link] [comments]|
2021.10.25 13:16 ToddJustWorks Praise Todd Howard
2021.10.25 13:16 VikingTec Made a chamfer with minimal extra effort. This will save lots of time in the future
|submitted by VikingTec to lasercutting [link] [comments]|
2021.10.25 13:16 Unicles98 New IPL teams.
2021.10.25 13:16 lha1107 ‘Guns Are Always Loaded’: Hollywood Weapons Expert Says Alec Baldwin Broke Cardinal Rule Of Gun Safety
|submitted by lha1107 to TheOnionNews [link] [comments]|
2021.10.25 13:16 VaultBoee Why do we eat ice cream after dentist?
|submitted by VaultBoee to terriblefacebookmemes [link] [comments]|
2021.10.25 13:16 thanks_its_a_box Even though it breaks some of the rules of simplicity - I retain that Bhutan has the most gorgeous national flag
|submitted by thanks_its_a_box to vexillology [link] [comments]|
2021.10.25 13:16 ssbm_dao Cost Difference between Single-Edge and Double-Edge Blades
From the pinned FAQ post's "Better Hardware" section, it says to use single cutting edge blade.
When I look on maggard razors for single-edge blades, they cost something like $0.50 to $1.00 per blade, whereas the double-edge blades cost less than $0.25 per blade. Do single-edge blades last longer than double-edge blades?
Also, does any safety razor hold both single-edge and double-edge blades? My current choice is the "Maggard Razors Safety Razor Head Standard V3", but I want to make sure that it supports single-edge blades before making the purchase.
For reference, up until now, I've only shaved my face and used cheap disposable razors, often without shaving cream. I recently decided that I want to start shaving my legs, so I'm trying to upgrade in order to make the overall shaving process faster, easier, and more environmentally friendly.
submitted by ssbm_dao to shaving [link] [comments]
2021.10.25 13:16 Rtoc 8 years already wow…. Definitely my least favorite in the Arkham series but still great game in my opinion though.
|submitted by Rtoc to BatmanArkham [link] [comments]|
2021.10.25 13:16 Get-em-girl Dog house
2021.10.25 13:16 TheCuratorofPixels 🎁🎁Giveaway 10/27 🎁🎁Win this Hyper-Legendary token! 👉Follow on Twitter for details👈It also comes with a legendary piece of crypto history. We’ve only existed 8 days and our following is growing exponentially! Roadmap will also be released after giveaway. Links below! 👇👇👇👇👇👇👇👇
|submitted by TheCuratorofPixels to NFTMarketplace [link] [comments]|